It is a good thing that you can get an alarm at low glucose. The problem with the alarm is that it keeps beeping after you are aware of the low glucose. It should be possible for the app to understand that user is informed of the low glucose when the app has been opened after an alarm. Then an alarm setting should be such that re-beeping is avoided within a predefined time, for example 30min (set by user). It will always take a while for the glucose to rise anyway. Since the alarm function is so annoying, people will tend to turn it off. Like myself. Then it is better to allow a softer alarm behavior.

Jeg vet ikke om det alltid har vært slik, men de siste månedene har jeg undret meg over at det mangler data når jeg leser av om morgenen.

Alt materiale sier at avlesning må skjer hver 8. time, men når jeg sjekker avlesningene mine er det hull i grafen så fort tidsrommet går over 7 timer.

Siste oppdatering har gjort appen super treig for iPhone 13 Pro..

I denne versjonen er hverken varsling eller lyder forbedret. Dere har stoppet utviklingen uten å høre på verdifulle forslag til forbedringer.

«Les av sensor»knappen har fått ny tekst som er feilstavet. Det heter SKANN på norsk. Appen må gå rett i SKANN når den åpnes. Da sparer vi ett unødvendig trykk

The app has worked just fine before. I used to get my readings instantly before when scanning. Now I need to hold it over the sensor for like 5 minutes for it to register and get my blood sugar up on the screen. Stop updating the app and making it worse!!

When will the app be compatible with the new Libre 3 sensors?

Hello!

The app got really slow after the last iOS update. I need to scan many times before i get my bloodsuger. I also have to touch the scan butten many times because it wont register that i have touched it. Are you coming with an update soon?

Hello, I have now used the App for iOS for some years and it is a great help on daily basis. However, a few improvements would have greatly reduced the risk for health issues due to diabetes side effects: - a "reminder" function when blood sugar level is outside range, either high or low. As it is now the alarm sounds when limit exceeds, for example 10 mmol/l, but is quiet even if level rises to 20. Happens to me regularly. Curve seems to flatten out after a meal, so I don't check it for a couple of hours, and then it is way too high. Not good! - I would like to choose the alarm sound myself. Now I can only choose a standard sound, which is easily overheard, or a very annoying alarm sound I would love to have different sounds for low and high alarms These two improvements would make the app much better.

Works fine when blood sugar levels are fairly normal and stable. Ideally always do 2 measurements 20 minutes apart before taking insulin, but often situation - such as hypoglycaemia - does not permit.

Slow to react and often with erratic values and direction during rapid blood sugar changes.

Extremely long delay in response when you need it the most - often leading to endless rollercoaster of sugar/insulin adjustments before getting back to normal. Very frustrating and potentially dangerous.

One year since last update? Seriously?

Går jo ikke an å stole på,nå har jeg føling å må vente 10 min. Ikke bra,blir bedt om å vente 10 min alt for ofte!!!

Savner sync mot Apple Health.

Savner mulighet for egne vibrasjonsalarmer.

Vanskelig å studere verdier over døgnet, da grafen er statisk. Ved å knytte mot Librelink Up appen, får jeg denne funksjonen. Hvorfor dette ikke er mulig i selve Librelink fatter jeg ikke. Savner også mulighet til å synke data mot apple Health app eller annen eksport til feks excel.

Har oppført seg stabilt til nå(1,5 døgn) Avlesing av sensor funger svært bra. Ingen feilkommunikasjon til nå. Funger fint gjennom klær.

A great tool, but many things need improving to make it the wonderful thing it can be.

- Alarsm and sounds. On an updated iphone I can't still not set custome sounds and vibrations. It just explodes in sound very often. This is an easy fix. The little scanner device was better than my iPhone. At least it had vibration mode. Please, fix this!

- Interpretation of the curve. This is perhaps more complex, but a fall from high to low in a rapid rate is not necessarily bad, but if I'm already low it is. And if I'm flat but low, getting the same alarm five times when I know what the low value is, is also a bit annoying.

- Others: better note taking, changing log going back in time, many scan errors and repeat alarm, sensor unavailable and general stability issues.

And no, I am not contacting support. My iPhone is new and I know how to use apps. Restarting is not the issue here. That's all you need to know.

Screen shot my comment, dump it in a folder with other complaints and suggestions, and get it to soon please. It's been a long time since any improvements have been made to this app.

This app has not been updated in over a year, despite many flaws described in the reviews.

List of important, but not exclusive, flaws include:

- A memory leak that makes the app slow down over time. Requires user to kill the app to regain performance.

- No communication with Apple health, (missing HealthKit integration.)

I don’t think the people designing this are using it themselves. If they had they would have fixed it. A couple of things:

- it is really slow. This matters when you are scanning all day long, especially in public you want it to go quickly. It makes me scan less frequently

- the alarms are not at all in sync with your last scan. Before writing this review I literally scanned, saw a low, then got a low warning within 10 seconds. I just saw my glucose 10 seconds ago. And the low sound is really loud. Scary movie loud. I’m going to get a heart attack. What about a mild alarm first. And loud if the wearer doesn’t hear it (swipe it). And don’t alarm me within at least 5 minutes of last scan please

- I don’t want alarm for quickly falling BS if it is real high. This is expected. I want it. I want alarm if it thinks I’m going to get low. Use derivative.

Very impressed about freestyle libre sensor.

Waiting when freestyle libre 2 will be available to buy in Norway

Veldig praktisk å alltid kunne måle blodsukker uten å ha med noe annet. Skjønner ikke hvorfor mange er misfornøyd med denne løsningen. I tillegg veldig oversiktlig i møte med helsepersonell

I have serious problems getting readings from my sensor. Either nothing happens or I am asked to wait 10 minutes. I am soon back to sticking my finger again.

Sensor and app works OK for glucose measurement without pricking your fingers. The graph and long- term estimate is helpfull. But it is such a shame that this promising technology and app does not fulfill its potential. The alarm function has signal error and is unavailable 90% of the time (yes developer/customer support; I have a new and updated iPhone). And worst of all, with extreme and fast change in glucose the app will only report «Error. Try again in 10 minutes» because it can’t compute the data fast enough. Overall an improvement in diabetes care, but software and interphase must improve.

Given the frequent signal-loss and errors, the Freestyle Libre and app gives a false sense of security. As a parent I would not trust it if I had to use it on one of my kids.

I am experiencing missing alarms when monitoring my blood sugar. Especially when my blood sugar goes very low, and I am sleeping, it’s not good. Do I have to delete the app after my sensor is finished and before I start a new one? I have a week left for this sensor.

Can’t find integration with Apple Health, a function you expect an health app has today.

Furthermore the graphs x-axis are static, so no possibility to focus in on a certain time period. Would also be nice if you could drag your finger along the graph and see your measurement value for that time.

Signaltap selv om mobilen er i umiddelbar nærhet, alarmen kommer etter skanning, kan ikke bruke sensorkontrollen sammen når appen er «førstegangs skannet».

The app has some kind of memory/resource leak issue that makes it slow and unusable over time. As it is currently, I have to kill and restart it once per day to keep it functional. Fixing these issues would be a great improvement.

Librelink reader doesn’t work. I had to remove my sensors twice, then app worked half a day, and now it doesn’t read anymore, again. It says alarms unavaliable, and it’s not connected via bluetooth. I don‘t know if it’s some error in the app but please fix this since out lives depend on it

Does not support Apple Health. For such an expensive device as Libre I took it for given that sync with apple health was incorporated. I hope for a update that fix this issue soon.

Kommer det til å noen gang være en version av appen som kan brukes på apple watchen?

Har tlf ved min side hele tiden, får alarm om at den må skannes på nytt 4-8 ganger i timen. Meget dårlig app det siste halve året, det blir verre og verre for hver måned som går. Tatt kontakt med kundeservice som ikke får til å hjelpe heller.

Min freestyle på iphone har blitt ustabil. Får melding om å vente 10 min før ny måling pgs sensorfeil. Men sensoren virker på målespparatet.

Mvh Ivar Østerlie

ivaroes@ gmail.com

Denne appen er egentlig perfekt, men alarmene gjør at jeg ikke kan bruke den. Det går ikke an å justere hverken volum på alarm eller hvordan alarmen skal lyde. Volumet er så høyt at det er grusomt (selv om volumet på mobilen er moderat).

Skvetter så jeg hopper av alarmen selv når jeg er i en annen etasje enn mobilen. Alarmene gjør at jeg heller velger å benytte den dårlige ekstramaskinen fra Abbott.

After renew the versjon nothing to work. Bought new scanner and it not connecting to phone normally and not showing sugar lever.

Appen har den siste tiden bare blitt dårligere og dårligere. For ca et år siden funnet den strålende, men nå får jeg signaltap HELE TIDEN, alarmene funker ikke, og av og til får man ikke til å scanne blodsukker i det hele tatt. Har nå måttet mye til å bruke avleseren fordi appen rett og slett ikke fungerer.

Such powerful technology, and how sad that it is such a rigid and inflexible and non-fluid app that goes along. It was almost better just using the reading-apparatus that came with the sensors. How hard can it be to zoom in and out, see what you measured yesterday (with a swipe), see the nodes of measurement you just made, go back and change notes you made, have an alternative to «how many calories» (most people are clueless to this, but they know how big a portion, or how many slices of bread they’re eating). As of now, it’s not the fantastic tool it should be, by a long shot.

Alt for ofte glukoseverdi ikke tilgjengelig og nå helt umulig og oppnå kontakt !! Mere styr enn og bare stikke seg i fingeren .

Have problems scanning the sensor with my smartphone. It looks like it suddenly doesn’t read the sensor, but the app is still waiting for me to scan.

Har stadig problemer med «signaltap» fra alarmer. Restarter app, virker en stund, men får samme alarm etter kort tid.

Heiii!! Jeg synes appen og sensoren funker bra! MEN jeg hadde likt den enda bedre om utformingen av hvordan det ser ut inne på appen kunne endret seg etter hva slags tid vi er i. Eks: juletider -juletema; påsketider-påsketema; valentinsdagen-masse hjerter osv!

Starter sensoren med mobil appen. Men får signaltap på alarmer HELE TIDEN. Har mobilen på meg hele tiden

Helt umulig å få startet opp en ny sensor!

Ingenting skjer når man trykker på start sensor. Dette er for dårlig!

Virker ikke med automatisk avlesning på iOS 14. Får hele tiden feilmeldinger om at sensor ikke er koblet til...... (manuell avlesning er ok)

Ellers en informativ og lettbrukt app☺️

Her må utvikler snarest oppdatere slik at appen virker sammen med siste IOS fra Apple . Selvfølgelig er enheten restartet !!!

Irriterende standard svar fra utvikler!!!!

Dette gjør livet med diabetes 100% lettere, ikke på samme måte som insulin pumpe sammenlignet med Pen/sprøyte sammenlignet, men mer som i å gå fra irritable fingre og gullfisk hukommelse til ett stikk hver 14 dag og påminnelse når du har høy/lav glukose ( blodsukker ), hadde dette vore tilgjengelig når jeg var barn så hadde komplikasjoner med diabetes seinere i livet vore minsket drastisk. Eneste grunnen til at dette ikke mottar full pott for meg er appen i sin helhet, den maser NÅR du er lav eller Høy i verdi når det burde istedenfor varsle deg for at nå er økning/senking drastisk, dette er muligens noe som kan forbedres i fremtidig oppdatering, dette var nok en litt vell lang « review », så kort oppsummert, spør etter dette fra din lege, hilsen en som lå på 13Ha1c til nå 5,5.

This is a really bad upgrade. Get it straight, or don’t put it out there. Way too many ‘can’t read’. Be sure to bring a manual reading, don’ t trust this one so far.

Fungerte veldig bra før oppdatering til IOS 14, etter dette så får jeg veldig ofte feilmelding om at jeg må sjekke telefonens innstillinger, alle tillatelser er i orden på telefonen. Må nå ha telefonen på lydløs for å slippe alarmer fra appen.

masse tull etter siste oppdatering. Feil med å oppdage sensoren flere ganger og får timeout ofte. Ikke oppgrader til siste versjon!

Last update is full of bugs and a nightmare to use. Takes up to 10-15 seconds to get every reading. Up from about 1 sec before.

How can we downgrade????

The latest release fail to read sensor data too often and goes into sleep mode. Make shure the important features work and rather skip all advanced statistics!

So, I have been using the LibreView app for 3 weeks now, and I have a few improvement suggestions for the app:

1. An option for adjusting the alarm volume. It's very loud.

2. Make the various curves zoomable, or at least let us toggle the time intervals into something shorter and more useful than 24 hours. Since the effects of a meal and insulin is supposed to last about 4 hours, something like 6 hours would be nice. Especially on the "Home" screen. Perhaps it could be adjustable from the settings.

3. When on the topic of the "Home" screen; It would be nice to be able to adjust the axis for the curves. 21 mmol/L far exceeds my normal values and makes everything so tiny. Again, 24 hours is a very long time interval.

4. Make it possible to flip the screen back and forth between horizontal and vertical orientation.

5. It would be nice if we could set additional alarms, or warnings. When the alarm goes off, it's already "too late". Because of the super loud volume on the alarms, it's disruptive to set them closer to normal values.

I would really like to be able to use the alarms/warnings to manage my blood sugar, not just for letting me know it's dangerously high/low.

6. It would be nice if there was a setting for "the arrows" that display how the blood sugar value is changing. I would like to be able to adjust how much of a increase/drop in blood sugar for the last period of time displays the arrows as straight up/down, straight right or in-between.

7. Also, please bring back Diasend connectivity?

Har brukt disse sensorene og appen i 1,5 år nå og for meg har det vært en stor forbedring. Man lærer seg og kjenne sin egen diabetes på en helt annen måte enn ved å stikke i fingeren innimellom.

Det er noen sensorer som fungerer dårlig og som vil gi unødvendige alarmer. Da river jeg bare av sensoren og starter en ny.

Det virker som appen noen ganger «gjetter» dersom man er på tur opp eller ned i blodsukker. Har vært borti at jeg justerer etter alarm også viser appen litt senere at blodsukker ikke har vært i nærheten av grensene jeg har satt. Har satt alarm på 4 på tur ned og 11 på tur opp og dette fungerer veldig greit for meg.

Har tidligere brukt denne appen på min gamle Samsung, hvor den i grunn fungerte som en drøm. Der kunne jeg bare scanne nye verdier når som helst uavhenging om jeg var på en annen app eller ikke. På iPhone som jeg nå har fått meg må jeg inn på appen, trykke på kontroller glukose for så å scanne sensoren. Dette er fryktelig tungvint og burde ikke være et stort problem å løse..

Ellers er appen mer eller mindre kliss lik.

Håper dere vil hjelpe oss Diabetikere litt for å gjøre dagen våres litt enklere 😅

Hasn’t worked since May. Should really do a rollback of the app. Crappy service

When I use my Apple Watch the alarm does not go of on my phone, but only a small notification on the watch. When I sleep the notification is to low to wake up to

i recently got diabetes and im using the freestyle libre sensor and my doctor said i should download the app to know how my blood sugar is doing. but the problem is that i cant conect to the server :( please fix this asap ❤️